Characterization of PFAS Air Emissions from Thermal Application of Fluoropolymer Dispersions on Fabrics
By Lindsay C. Wickersham, James M. Mattila, Jonathan D. Krug, Stephen R. Jackson, M. Ariel Geer Wallace, Erin P. Shields, Hannah Halliday, Emily Y. Li, Hannah K. Liberatore, Stanley (Mac) Farrior, William Preston, Jeffrey V. Ryan, Chun-Wai Lee, and William P. Linak
J Air Waste Manag Assoc
March 27, 2023
DOI: 10.1080/10962247.2023.2192009
During thermal processes utilized in affixing fluoropolymer coatings to fibers and fabrics, coating components are vaporized. It is suspected that per- and polyfluoroalkyl substances (PFAS) from the dispersions may undergo chemical transformations at the temperatures used, leading to emitted PFAS thermal byproducts. It is important to characterize these emissions to support evaluation of resulting environmental and health impacts. In this study, a bench-scale system was built to simulate this industrial process via thermal application of dispersions to fiberglass utilizing relevant temperatures and residence times in sequential drying, baking, and sintering steps. Experiments were performed with two commercially available dispersions and a simple model mixture containing a single PFAS species (6:2 fluorotelomer alcohol [6:2 FTOH]). Vapor-phase emissions were sampled and characterized by several off-line and real-time mass spectrometry techniques for targeted and non-targeted PFAS. Results indicate multiple PFAS thermal transformation products and multiple non-halogenated organic species were emitted from the exit of the high temperature third (sintering) furnace when 6:2 FTOH was the only PFAS present in the aqueous mixture. This finding supports the hypothesis that temperatures typical of these industrial furnaces may also induce chemical transformations within the fluorinated air emissions. Experiments using the two commercial fluoropolymer dispersions indicate air emissions of part-per-million by volume (ppmv) concentrations of heptafluoropropyl-1,2,2,2-tetrafluoroethyl ether (Fluoroether E1), as well as other PFAS at operationally relevant temperatures. We suspect that E1 is a direct thermal decomposition product (via decarboxylation) of 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propanoic acid (commonly referred to as HFPO-DA) present in the dispersions. Other thermal decomposition products, including the monomer, tetrafluoroethene, may originate from the PFAS used to stabilize the dispersion or from the polymer particles in suspension. This study represents the first researcher-built coating application simulator to report nontargeted PFAS emission characterization, real-time analyses, and the quantification of 30 volatile target PFAS.
Topics: