Noise-Reduced Quantitative Fluorine NMR Spectroscopy Reveals the Presence of Additional Per- and Polyfluorinated Alkyl Substances in Environmental and Biological Samples When Compared with Routine Mass Spectrometry Methods

By Jeremy R Gauthier and Scott A Mabury
Anal Chem
February 15, 2022
DOI: 10.1021/acs.analchem.1c05107

Per- and polyfluorinated alkyl substances (PFAS) are ubiquitous throughout the environment. Analysis of PFAS is commonly performed using both targeted and nontargeted mass spectrometry methods. However, it has been demonstrated that measurements of fluorinated compounds in the environment by mass spectrometry often fall short of the total fluorine concentration. In the present study, we employ a F NMR technique, which is capable of detailing fluorinated compounds in a sample while providing both quantitative and structural information. Inclusion of a noise-reduction strategy involving the acquisition of arrays of spectra with an increasing number of transients addresses the sensitivity challenges of environmental nuclear magnetic resonance (NMR), improving signal to noise. When this technique is applied to environmental and biological samples including rainwater, lake water, wastewater effluent, serum, and urine, the presence of PFAS, which may have been missed by routine mass spectrometric methods, is revealed. Important resonances in the F NMR spectrum such as that of trifluoroacetic acid are brought above the limit of quantification in all samples, allowing detection limits as low as 389 pg/L in rainwater. A liquid chromatography-tandem mass spectrometry (LC-MS/MS) method, which was used to analyze 47 PFAS compounds, accounts for only 3.7-27% of the total fluorine concentration as determined by the NMR strategy in the present study.

View on PubMed

Topics: